Product Range
1 / 24Páginas

Compressed air quality classes conforming to ISO 8573-1:2010

Clean room systems Dairy industry Brewing industry Food industry Chip manufacture General application exposed to frost risk Ultra-fine pressure Food industry Chemical industry Clean room systems Photo labs Sandblasting with quality requirement

Filter Elements and Cartridges Heatless Regeneration Adsorption Dryers ECOTROC® ATK-HP | ATC-HP High-Pressure Adsorption Dryer and ECOTROC® ATW-V | ATW-VG Heated and Vacuum Regenerated Medical and Industrial Breathing Air Nitrogen and Oxygen Generators

Membrane Dryers Refrigeration Dryers Condensate Drains Oil-Water Separators Alternative Filter Elements for other Alternative Activated Carbon Filters for manufacturers Compressed Air Filters other manufacturers Oil/Water Separators

ECOCLEAN® compressed air filters meet the strictest quality requirements and are extremely economical in purchase price, operation and maintenance. The housing is made of cast aluminium, with an anti-corrosion protective coating on both the inside and outside and an additional powder coating on the Other features: • Optimized flow through the filter due to the curved compressed air inlet that reduces flow resistance by up to 75 % • Prevention of corrosion and bacteria formation • A tie-rod fastens the filter element securely in position • Hexagon nut flats on the filter housing base for...

Compressed Air Filter Elements The combination of operational safety and cost effectiveness perfectly implemented in one product is KSI's starting point for ECOCLEAN® high-performance filter elements. • the carefully designed inner and outer structure of the support unit reduces the differential pressure by up to 45 % compared to conventional support cylinders • Maximum filtration area due to the specially optimized winding -> for maximum depth filtration • Special component adhesive fastens the end caps securely • Plastic end caps prevent corrosion ("blooming") and bacteria • A filter...

Heat less Regeneration Adsorption Dryer ECOTROC®ATadsorption dryers ensure high reliability and economical operation through a comprehensive design concept that provides basic uniformity whilst permitting diversified product family development. Features: • Highly hygroscopic desiccant, ensuring stable pressure • The changeover valves used have no electric controls, and so there is no potential risk in this area • Standardized brand-name blow-out valves ensure operating safety • Microprocessor control ensures an economical and low-wear • Integrated compressor synchronizing circuit as...

For operating processes requiring maximum process safety, the activated carbon filter is a proven solution. Features of the KSI ECOTROC® ATC-AP and ATC product line: • Optimal adsorption of oil vapour (hydrocarbons) • Highly active activated carbon for air and gases provides maximum efficiency • Optimized volume distribution across the entire activated • Oil indicator for checking the saturation level, standard • Easy accessibility for uncomplicated service • 10,000 hours of activated carbon service life* * The application time of the activated carbon depends on the quality and relative...

Operational reliability Two (ATK-AP) or three (ATK) large dimensioned silencers offer additional safety by essentialy eliminating the risk of any discharge of desiccant dust to • The exclusive use of quality desiccants from well-known manufacturers assures reliability of performance. • Pre- and final filter provided as standard (up to ATK no) offer system Service Friendly for ease of Maintenance • The desiccant is changed via filler and drain ports in all ECOTROC8 AT models. This design eliminates the need for awkward and time consuming dismantling of the head and foot plates in the AT-AP...

Dew Point Controls with Intelligent Functions A clear plus in reliability and energy savings • Available as an option for the entire ECOCTROC® AT series • All ECOCTROC® AT dryers can be easily upgraded (even older models and models from other manufacturers) • Dew point measurement and display up to -ioo°C Demand-based regeneration control by measuring the operational conditions • Intergrated variable load counter (facilitates possible vessel inspections at a later date) • Storage of the operating parameters together with time data (retained and restored after power failure) • Password...

High-Pressure Adsorption Dryers and Oil Vapour Adsorber ECOTROC® ATK-HP and ATC-HP Top mechanical engineering competency and "Made in Germany" production guarantee safe and reliable treatment in the standard range from 50 bar to 350 bar (up to 500 bar upon The ECOTROC® ATK-HP product series is based on the globally successful ECOTROC® ATK adsorption dryer series. Providing proven construction as well as also process technology for the ATK-HP series. Perfected with high-pressure components of the best industrial equipment quality, a system solution of exemplary safety and compactness is...

Heat and Vacuum Regenerated Adsorption Dryers ECOTROC® ATW-V | ATW-VG EC0TR0C8 ATW-V/-VG sets new standards by operating entirely free of purging air, in combination with having a low regenera- tion temperature based on vacuum technology. In addition, it has a user-friendly and extensive control system. The overall system generates optimum efficiency and top quality com- pressed air or compressed gas with constant linear supply at • Regeneration by heated ambient air in parallel flow to adsorption (ATW-V) or counter-flow to adsorption (ATW-VG) • Cooling by ambient air intake in parallel...

Medical and Industrial Breathing Air Where health is concerned, operating safety, air quality and reliability of conditioning are decisive. With the ECOTROC8 ATM and ATT product lines we satisfy the strict requirements for medical and industrial breathing air, again in combination with first-class value for money. As a result, this KSI high-end sys- tem solution provides breathing air complying with the follow- ing applicable standards and limits: ECOTROC® ATM (for medical breathing air): • European Pharmacopoeia ECOTROC® ATT (for industrial breathing air): Adsorption dryers ATM-AP and ATM...