T3LD
1 / 2Páginas

{{requestButtons}}

Excertos do catálogo

T3LD - 1

EQUIPMENT FOR LEAK TESTS BY DIFFERENTIAL METHOD • Leak tests with full scale up to 40 bar and in vacuum • Resolution of 0.1 Pa (0.001 mbar) • 7” colour LCD display with touchscreen • 300 test programs • 300 test sequences • Digital I/O interfaces for PLCs, RS232/ RS485 serial lines, USB for PC, Ethernet, Profinet DESCRIPTION T3LD is an innovative device for leak of the tests, makes the programming and “in bell” tests on sealed products or tests by pressure differential method. By measuring the pressure difference Its high measurement resolution and The control of external automations, between the product being tested and the test accuracy, in combination with the interface with barcode, Qrcode a reference sample, the test times the electronic regulation of the filling readers and printers and the possibility pressure, allow to perform not only to manage and record the tests, make leak tests but also destructive burst it a complete and suitable instrument The touch interface, with a colour tests, safety valves opening checks, for the most modern production display and the real-time visualization volumetric control, obstruction tests DIFFERENTIAL PRESSURE DECAY The testing cycle is based on a comparison between the product being tested and a reference volume. In this way, the effects of the pressure settlement inside the tested product are reduced and the accuracy in detecting a leak rate is increased, achieving excellent results in a quicker interval. CALIBRATION SERVICE Each equipment is accompanied by a calibration report released by Tecna. According to the requirements of ISO9001 standard, calibration must be verified at specified intervals against national or international test masters. Tecna and Marposs, through specialized personnel and certified instruments, offer a complete scheduled calib

Abrir o catálogo na página 1
T3LD - 2

Provaset T3LD SPECIFICATIONS Power Supply Dry, non-condensing, 5-micron filtered and oil-free air, compliant with ISO8573-1 (1:2:1) Calibration Reports or Certificates Software-guided procedure with sample instruments. Pressure Regulator Electronic, with dedicated pressure transducer to visualize the regulated pressure on the display; alternatively manual regulator 7” colour TFT LCD display with resistive touchscreen 4 LED lights (testing phases, pass/reject outcome) Test counter Passed and Rejected totals, resettable to zero Audible alarm Built-in beeper with programmable duration...

Abrir o catálogo na página 2

Todos os catálogos e folhetos técnicos MARPOSS

  1. SOFTWARE

    2 Páginas

  2. DOSASET

    2 Páginas

  3. LTC

    2 Páginas

  4. LEAK MASTER

    2 Páginas

  5. TM3P

    2 Páginas

  6. TM3PF

    2 Páginas

  7. TM3PD

    2 Páginas

  8. T3LPQ

    2 Páginas

  9. T3LPF

    2 Páginas

  10. T3LP

    2 Páginas

  11. T3LMF

    2 Páginas

  12. T2

    2 Páginas

  13. 2SEAL

    2 Páginas