Tethys washer-disinfectors
1 / 4Páginas

Control system Available programs 15 (including 6 personalizable) Digital display with “soft-touch” keyboard In-chamber temperature From room temperature up to 95°C Resistance thermometers PT 1000 cl. B (IEC 60751) Peristaltic pumps Detergent and neutralizer level sensors Dosing systems for detergent and neutralizer Door locking system Yes, electromagnetic with automatic opening Data storage on last 100 programs carried out Cycle archive Yes, with dedicated program Washing chamber material AISI 316L stainless steel Outside panels AISI 304 stainless steel HEPA filter Water supply Built-in water softener Steam condenser Water heater power (electronically controlled) Forced air, with hot air generator Yes (class C 98%) Drying system Tethys washer-disinfectors. A symphony in harmony. Electronic with microprocessor Normal cold water supply (1,5 - 5 bar) Distilled water Normal cold water supply (1,5 - 5 bar) Yes, automatic volumetric regeneration (up to 60°F) High-efficiency ECO SLIM system 2,3 kW (single-phase version) 6,3 kW (three-phase version) Mocom S.r.l. reserves its rights to make changes to its products shown in photos without prior notice. Weight Voltage and rated power Noise level * Built-in version, with optional top A quality product, with the guarantee of stringent testing and certificates, including: • ISO 9001/ISO 13485 Quality Management Systems for Medical Devices • CE 0051 European Community Marking for Medical Regulation Quality products meeting applicable standards: • Directive no. 93/42/CEE electromagnetic compatibility for Medical Equipment • Directive no. 2006/95/CE for Low Voltage • Directive no. 2004/108/CE for Electromagnetic Compatibility • EN 15883-1: General performance requirements for washer-disinfectors STERILIZATION FIRST Via Saliceto, 22 - 40013 Castel Maggiore (BO) Italy • Tel. (+39) 051.700877 • Fax (+39) 051.701056 e-mail: infomocom@mocom.it • www.mocom.it • EN 15883-2: Washer-disinfectors: requirements and tests for washer-disinfectors using thermal disinfection • EN 61010-1: Safety requirements for electrical equipment for laboratory use • EN 61010-2-040: Special safety requirements for washer-disinfectors STERILIZATION FIRST

Tethys: hygiene takes center stage Efficiency The large capacity washing chamber, twin trolleys, eco-slim steam condenser, extensive range of washing programs, handy control panel display and visual and acoustic endof-cycle warnings all help to ensure easy operation and top quality performance. Reliability The washing chamber and door made from AISI 316L stainless steel, flow-meter control of detergent dosage, level sensors and timers, “soft start” function to avoid thermal shock in the chamber and a number of anti-impurity filters ensure that a Tethys device will give satisfaction. •...

Printer Traceability of washing and disinfection cycles is an indispensable requirement as evidence that a process has been carried out correctly. The optional printer therefore becomes a useful accessory for saving data in print-out form. Tethys: “ouverture” Process management Tethys washer-disinfectors are fitted with two highprecision temperature sensors for the management of the washing and disinfection cycles. The A0 parameter can also be checked in real time with the value shown on the display. If the machine is connected to a printer, this data is also printed on the report at the...

Tethys: optional extras Every professional environment is characterized by the type of instruments used in it and specific requirements concerning their handling. For this reason, Tethys washer-disinfectors have a wide range of accessories available, enabling an individual customized set-up in the washing room, in response to all the needs of the various medical sectors. Containers and supports A wide range of accessories to cater for the wide variety of demands and make best use of available space. Washing of handpieces and cannulas Stainless steel basket with handles; dimensions 435 x 310...