BIOMECHANICAL TEST MATERIALS
1 / 16Páginas

{{requestButtons}}

Excertos do catálogo

BIOMECHANICAL TEST MATERIALS - 1

BIOMECHANICAL TEST MATERIALS A Division of Pacific Research Laboratories, Inc.

Abrir o catálogo na página 1
BIOMECHANICAL TEST MATERIALS - 2

SdWBOMS' BIOMECHANICAL TEST MATERIALS Biomechanical test materials are used as an alternative to cadaver bone for testing orthopaedic implants, instruments and instrumentation. Our biomechanical test materials offer uniform and consistent physical properties that considerably reduce variability and eliminate special handling requirements encountered with cadaver bone. These materials are most commonly used for comparative and developmental testing of bone screws, staples and fusion devices. Rigid polyurethane foam blocks are transverse isotropic due to the direction of rise during...

Abrir o catálogo na página 2
BIOMECHANICAL TEST MATERIALS - 3

SHOULDER #3408 — Large, left clavicle manufactured in medial and lateral sections without canal. Dimensions: a distal) 95 mm; a proximal) 80 mm; b) 15 mm; c) 28 mm; d) 29 mm #3408-1 — Large, left clavicle without canal. Dimensions: a) 175 mm; b) 15 mm; c) 28 mm; d) 29 mm #3413 — Large, left scapula. Dimensions: a) 155 mm; b) 28 mm; c) 45 mm 3413-1 — Large, left scapula with 10 PCF solid foam cancellous core. Dimensions: a) 155 mm; b) 28 mm; c) 45 mm 3413-2 — Large, left scapula with 12 PCF solid foam cancellous core. Dimensions: a) 155 mm; b) 28 mm; c) 45 mm ARM #3404 — Large, left...

Abrir o catálogo na página 3
BIOMECHANICAL TEST MATERIALS - 4

SPINE SINGLE LEVEL #3429-1 — individual LI solid cortical, no cancellous foam, #3429-2 — individual L2 solid cortical, no cancellous foam, #3429-3 — individual L3 solid cortical, no cancellous foam, #3429-3-2 — Individual composite L3 vertebrae with 10 PCF (0.16 g/cc) density solid foam cancellous core, Dimensions: a) 48 mm; b) 35 mm; c) 11 mm; Pedicle height 16 mm, #3429-3-4 — Individual composite L3 vertebrae with 5 PCF (0,08 g/cc) density solid foam cancellous core, Dimensions: a) 48 mm; b) 35 mm; c) 11 mm; Pedicle height 16 mm, #3429-4 — individual L4 solid cortical, no cancellous...

Abrir o catálogo na página 4
BIOMECHANICAL TEST MATERIALS - 5

LARGE Dimensions: a) 485 mm; b) 52 mm; c) 37 mm; d) 120o; e) 32 mm; f) 93 mm; g) 16 mm canal standard; h) 106 mm Also available with 10 or 12.8 mm canal. #3406-11 — 8 PCF solid foam cancellous core. #3406-5 — 10 PCF solid foam cancellous core. #3406-13 — 12 PCF solid foam cancellous core. #3406-17 — 15 PCF solid foam cancellous core. #3406 — 17 PCF solid foam cancellous core. #3406-12 — 20 PCF solid foam cancellous core. #3406-7— 12.5 PCF cellular foam cancellous core. #3406-18 — 15 PCF cellular foam cancellous core. #3406-4 — 20 PCF cellular foam cancellous core. MEDIUM Dimensions: a) 455...

Abrir o catálogo na página 5
BIOMECHANICAL TEST MATERIALS - 6

#3405 — Large, left hemi-pelvis. Dimensions: a) 235 mm; b) 55 mm; c) 140 mm; d) 175 mm #3409 — Large, right hemi-pelvis. Dimensions: a) 235 mm; b) 55 mm; c) 140 mm; d) 175 mm #3415 — Full pelvis with fused pubis symphysis and sacroiliac joints. #3415-1 — Full pelvis with fused pubis symphysis and right sacroiliac joint. #3419 — Large, left patella. Dimensions: a) 19 mm; b) 11 mm; c) 78 mm; d) 47 mm; e) 50 mm #3401 — Medium, left tibia with 9 mm canal. Dimensions: a) 375 mm; b) 74 mm; c) 22 mm; d) 50 mm #3401-1 — Medium, left tibia with 10° of varus deformity and 9 mm canal. Dimensions: a)...

Abrir o catálogo na página 6
BIOMECHANICAL TEST MATERIALS - 7

BLOCKS SOLID RIGID POLYURETHANE FOAM Solid rigid polyurethane foam is used as an alternative test medium for human cancellous bone. It does not replicate the structure of human bone, however, it does provide consistent properties in the range of human cancellous bone. This closed cell polyurethane foam is most commonly used for testing screw pullout, insertion and stripping torque. The ASTM F-1839-08 "Standard Specification for Rigid Polyurethane Foam for Use as a Standard Material for Testing Orthopaedic Devices and Instruments" states "The uniformity and consistent properties of...

Abrir o catálogo na página 7
BIOMECHANICAL TEST MATERIALS - 8

BLOCKS CELLULAR RIGID POLYURETHANE FOAM This closed cell polyurethane foam has a cell size that is closer to human cancellous bone and is most commonly used for testing subsidence, press-fit devices and cement augmentation. BLOCK SIZE: 13 cm x 18 cm x 4 cm #1522-09— 7.5 PCF #1522-10 — 10 PCF #1522-11 — 12.5 PCF #1522-1300 — 15 PCF #1522-12 — 20 PCF DENSITY COMPRESSIVE COMPRESSIVE Size (PCF) (g/cc) Volume Fraction *Contains e-glass fibers. OPEN CELL RIGID FOAM This open cell foam is a composite made of urethanes, epoxies and structural fillers. It is most commonly used in specific...

Abrir o catálogo na página 8
BIOMECHANICAL TEST MATERIALS - 9

SdWBOMSSOLID RIGID POLYURETHANE FOAM SHEETS FOAM SHEET TOLERANCES: COMPOSITE SHEETS EPOXY SHEET TOLERANCES:

Abrir o catálogo na página 9
BIOMECHANICAL TEST MATERIALS - 10

CUSTOM LAMINATED FOAM BLOCKS Laminated test blocks are manufactured to your specifications using any combination of solid rigid polyurethane foam, cellular rigid polyurethane foam, open cell rigid foam and short fiber filled epoxy sheets. Blocks are laminated with sheet(s) of solid rigid polyurethane foam or short fiber filled epoxy selected to simulate unicortical or bicortical bone. Standard laminated test blocks are 12 cm x 17 cm with a thickness based on your specified combination of block and sheet sizes. All blocks and sheets are laminated together with 0.64g/cc (40PCF) solid rigid...

Abrir o catálogo na página 10
BIOMECHANICAL TEST MATERIALS - 11

CYLINDERS COMPOSITE CYLINDERS These hollow cylinders are made with short fiber epoxy, see property table on page 1. They can be filled with solid, cellular or open cell foam upon request for an additional charge. Customized cylinders can be made upon request. OVERALL LENGTH 500 MM PART OUTSIDE DIAMETER WALL THICKNESS OVERALL LENGTH 110 MM _PART_OUTSIDE DIAMETER_WALL THICKNESS #3403-03 74 mm 3 mm OVERALL LENGTH 150 MM _PART_OUTSIDE DIAMETER_WALL THICKNESS #3403-11 10 mm solid OVERALL LENGTH 250 MM _PART_OUTSIDE DIAMETER_WALL THICKNESS #3403-23 20 mm 7.5 mm

Abrir o catálogo na página 11
BIOMECHANICAL TEST MATERIALS - 12

WORKSHOP BONE Cortical geometry only. File formats: Step, Parasolid, SolidPart, IGES Upper extremity #3920 — Large, left clavicle. Reference part #1020. #3949 — Large left scapula. Reference part #1021. #3921 — Large, left humerus. Reference part #1028. #3917 — Large, left ulna. Reference part #1017. #3918 — Large, left radius. Reference part #1018. #3919 — Large, left hand/wrist. Reference part #1022. #3916 — Large, left hand. Reference part #1016. Spine #3955 — Large sacrum. Reference part #1298. Lower extremity #3952 — Large, left hemi pelvis. Reference part #1294. #3953 — Large, right...

Abrir o catálogo na página 12

Todos os catálogos e folhetos técnicos Sawbones/Pacific Research Labs

  1. RediStik-ECMO

    6 Páginas

  2. Alex-Labrum

    2 Páginas

  3. TKS

    1 Páginas

  4. FioNA

    2 Páginas

  5. Solid Clear Models

    17 Páginas

  6. Pediatric Catalog

    8 Páginas

  7. GENERAL CATALOG

    88 Páginas