OEM products Built-In Version
1 / 12Páginas

Built-in Pumps & Accessories OEM Versions • Peristaltic pumps • Symax syringe pumps • Tubing

Built-in OEM peristaltic pumps The basic purpose of a peristaltic pump is to move fluids from A to B. But this is not enough for manufacturers of analysis equipment and other devices that require fluids to be transported. Alongside technical characteristics such as pulsation, precision and stability, other factors also play a role, such as an attractive, individual appearance of the pumps. And that is exactly what Spetec aims for. Stepper motor controller 7 Examples of built-in peristaltic pumps 8 Syringe pump Symax 10

Individuality is where our strength lies petec does not offer traditional series. Instead, a few basic components and parts are used that are manufactured in large quantities for many customers. The visual appearance, on the other hand, is always designed to customer requirements. In essence, this concerns the color and form of the baseplate on which the actual pump is fitted. It is also possible to influence the color and shape of many other individual components. The result is a custom product bearing the signature of the device‘s manufacturer and which perfectly matches the design of the...

Precision Standard The large roller head with 12 rollers allows these pumps to meet the most stringent requirements in respect of low pulsation and consistency of fluid delivery. Technical data Precision Standard Exemplary illustration

Precision Compact This is a smaller version of the standard pump with a scale of 2:1. It has extremely similar properties in respect of delivery accuracy. Technical data Mechanical: Stepper motor_ Adjustment lever Pressure bracket Roller head Tube holder

These pumps are simpler, less expensive versions that are also operated with wear-resistant stepper motors. Technical data Low-cost-mini Exemplary illustration Mechanical:

Stepper motor controller SM04 The optionally available Spetec stepper motor controller SM04 is an in-house development that can be fixed directly to the pump. It has been designed for the operation of 2-phase stepper motors with step angles of 1.8° and 0.9°. Using the Spetec SM04, a single full step can be subdivided into 64 microsteps. This corresponds to 12,800 steps per revolution. This ensures that the equipment runs extremely smoothly and silently. Benefits • On-chip temperature monitoring • Reduced current at low speeds, resulting in less heating of stepper motor • Simple control via...

Examples of built-in peristaltic pumps 1 Diameter roller head: 36 mm 3 Diameter roller head: 72 mm 5 Diameter roller head: 72 mm 8 2 Diameter roller head: 30 mm 4 Diameter roller head: 72 mm 6 Diameter roller head: 72 mm

7 Diameter roller head: 72 mm 9 Diameter roller head: 72 mm 11 Diameter roller head: 72 mm 8 Diameter roller head: 36 mm 10 Diameter roller head: 30 mm 12 Diameter roller head: 72 mm 9

Syringe pump The Spetec syringe pump is used for metering fluids in the microliter and nanoliter range. Its core components consist of the stepper motor drive with no wear components such as clutch or gearing, high-precision carriage, syringe holder set, and replaceable syringe. Thanks to the high resolution of 25,600 steps per revolution, individual steps during the movement sequence are barely perceptible. Dimensions LxWxH (without syringe holder) Technical data SYMAX www.spetec.de/en/products/laboratory-equipment/ syringe-pump-symax Request our seperate brochure.

iariety is where our strength lies. We can supply you with any tubing configuration in a range of diameters and grades with 1, 2 or 3 bridges. Alternatively, we can supply tubing by the meter. Do you need special lengths with unusual bridge intervals? We would be happy to send you an offer with short delivery times. Materials: • PVC Standard • Solvent Flex – Solvent resistant • PU Longlife • Fluoro rubber (comparable to Viton) • antoprene® S (comparable to Pharmed / Mediprene) • Silicone www.spetec.de/en/products/laboratory-equipment/ pump-tubing-tubes

SPETEC® GmbH Berghamer Str. 2 D-85435 Erding Phone: +49 (0)8122/99533 Fax: +49 (0)8122/10397 E-mail: spetec@spetec.de www.spetec.de