Porti 7
1 / 153Páginas

Porti 7 Technical Specifications

Technical Specifications Introduction This document includes the technical specifications of the available configurations of the Porti7 device. This document is supplementary to the User Manual provided with the product. Refer to the User Manual for instructions for use of the device. Use of this document 1. Locate the device label on your Porti device. The label can be found on the bottom of the device and looks like the picture depicted on the right. 2. Use the table of contents on the next pages to locate your device. This table is sorted on the REF code that can be found on the label....

Technical Specifications

Technical Specifications

Technical Specifications

Technical Specifications Bluetooth supported sample frequencies/channel rates: * 2000 Hz, 1000 Hz, 500 Hz sample frequencies are not possible using Bluetooth communication ** 250 Hz sample frequency is supported for a limited number of channels

Technical Specifications Channel list:

Technical Specifications < 20 pV (@ lowest sample frequency) 1 x -3 V to +3 V (@ 0 V common signal) -4 V to +4 V (@ 0 V differential signal) > 100 MQ > 70 dB +5 V & -5 V, max 40 mA for all channels together 5 pin plastic connector 2 mA @ 3 V input, max. input = 5 V > 4000 V, by means of optocoupler (H11L1) Plastic LEMO FFA.00, center pin is + AUX inputs RMS Noise Gain Input signal difference Input common mode range Input impedance CMRR Output voltage Connector Trigger input: Input turn-on current Isolation Connector type 2000, 1000 Hz sample frequencies are not possible using Bluetooth...

Technical Specifications Channel list:

Technical Specifications < 20 pV (@ lowest sample frequency) 1 x -3 V to +3 V (@ 0 V common signal) -4 V to +4 V (@ 0 V differential signal) > 100 MQ > 70 dB +5 V & -5 V, max 40 mA for all channels together 5 pin plastic connector 2 mA @ 3 V input, max. input = 5 V > 4000 V, by means of optocoupler (H11L1) Plastic LEMO FFA.00, center pin is + AUX inputs RMS Noise Gain Input signal difference Input common mode range Input impedance CMRR Output voltage Connector Trigger input: Input turn-on current Isolation Connector type 2048, 1024 Hz sample frequencies are not possible using Bluetooth...

Technical Specifications Channel list:

Technical Specifications < 20 pV (@ lowest sample frequency) 1 x -3 V to +3 V (@ 0 V common signal) -4 V to +4 V (@ 0 V differential signal) > 100 MQ > 70 dB +5 V & -5 V, max 40 mA for all channels together 5 pin plastic connector 2 mA @ 3 V input, max. input = 5 V > 4000 V, by means of optocoupler (H11L1) Plastic LEMO FFA.00, center pin is + AUX inputs RMS Noise Gain Input signal difference Input common mode range Input impedance CMRR Output voltage Connector Trigger input: Input turn-on current Isolation Connector type 2048 Hz sample frequency is not possible using Bluetooth...

Technical Specifications Channel list:

Technical Specifications < 20 pV (@ lowest sample frequency) 1 x -3 V to +3 V (@ 0 V common signal) -4 V to +4 V (@ 0 V differential signal) > 100 MQ > 70 dB +5 V & -5 V, max 40 mA for all channels together 5 pin plastic connector 2 mA @ 3 V input, max. input = 5 V > 4000 V, by means of optocoupler (H11L1) Plastic LEMO FFA.00, center pin is + AUX inputs RMS Noise Gain Input signal difference Input common mode range Input impedance CMRR Output voltage Connector Trigger input: Input turn-on current Isolation Connector type * 2048 Hz sample frequency is not possible using Bluetooth...

Technical Specifications Channel list:

Technical Specifications Bipolar ExG inputs (EEG, ECG, EOG, EMG etc.) RMS Noise < 1 pV (@ lowest sample frequency)

Technical Specifications * 2048 Hz, 1024Hz sample frequencies are not possible using Bluetooth communication ** 512 Hz sample frequency is supported for a limited number of channels.

Technical Specifications Channel list:

Technical Specifications Bipolar ExG inputs (EEG, ECG, EOG, EMG etc.) RMS Noise < 1 pV (@ lowest sample frequency)

Technical Specifications * 2048 Hz, sample frequencies are not possible using Bluetooth communication ** 1024 Hz sample frequency is supported for a limited number of channels.

Technical Specifications Channel list:

Technical Specifications Bipolar ExG inputs (EEG, ECG, EOG, EMG etc.) RMS Noise < 1 pV (@ lowest sample frequency)

Technical Specifications Bluetooth supported sample frequencies/channel rates: * 2048 Hz, 1024 Hz, sample frequencies are not possible using Bluetooth communication ** 512 Hz possible with limited number of channels

Technical Specifications Channel list:

Technical Specifications Bipolar ExG inputs (EEG, ECG, EOG, EMG etc.) RMS Noise < 1 pV (@ lowest sample frequency) Input signal difference -150 mV to +150 mV (@ 0 V common signal) Input common mode range -2 V to +2 V (@ 0 V differential signal) Input impedance > 100 MQ Trigger input: Input turn-on current Isolation Connector type 2 mA @ 3 V input, max. input = 5 V > 4000 V, by means of optocoupler (H11L1) Plastic LEMO FFA.00, center pin is + Bluetooth supported sample frequencies/channel rates: 2000, 1000 Hz sample frequencies are not possible using Bluetooth communication 500...

Technical Specifications Channel list:

Technical Specifications RMS Noise < 1 pV (@ lowest sample frequency) Input signal difference -150 mV to +150 mV (@ 0 V common signal) Input common mode range -2 V to +2 V (@ 0 V differential signal) Input impedance > 100 MQ Connector 4 pin plastic connector 2 mA @ 3 V input, max. input = 5 V > 4000 V, by means of optocoupler (H11L1) Plastic LEMO FFA.00, center pin is + Trigger input: Input turn-on current Isolation Connector type 2048, 1024 Hz sample frequencies are not possible using Bluetooth communication 512 Hz sample frequency possible with a limited number of channels

Technical Specifications Channel list:

Technical Specifications Bipolar ExG inputs (EEG, ECG, EOG, EMG etc.) RMS Noise < 1 pV (@ lowest sample frequency) Input signal difference -150 mV to +150 mV Input common mode range -2 V to +2 V (@ 0 V differential signal) Input impedance > 100 MQ Wireless Sync module ID See label on Porti system * 2000 Hz sample frequency is not possible using Bluetooth communication ** 1000 Hz supported for a limited number of channels