va-Q-mic
1 / 4Páginas

Technical Data Sheet va-Q-mic Product Description va-Q-mic is a microporous insulation based on a microfleece as core material. The qualified and non-harmful core material is covered, evacuated and sealed in a special process by a gas-tight plastic film which is also impermeable to water vapour. In general va-Q-mic is produced in rectangular shapes by our innovative va-Q-seam technique but individualized shapes are also possible on request. va-Q-mic is mainly used in one-way packaging systems. Huge reduction of the insulation thickness Lowest thermal conductivity at delivery 100 % quality control with the patented gas pressure measurement system (va-Q-check)

Properties Thermal conductivity - initial value @ 10 °C* 0.0028 – 0.0035 W/(m∙K) (at delivery) according to DIN EN 12667 Thermal conductivity, ventilated @ 10 °C* U-Value - initial value @ 10 °C* Area density Temperature resistance Moisture resistance Thermal shock resistance Specific heat capacity 0.001 kJ/kgK (at room temperature) Compressive strength at 10 % compression Depending on usage, up to 5 years Available thickness *Please note terms of service § 6 “Deviation range of the insulation value” in “Special Terms and Conditions of Sale and Delivery, Product: Vacuum Insulation Panels...

Remark: Please ask for preferred sizes and tolerances.

Legal Notes/Disclaimer The data presented in this technical data sheet are in accordance with the present state of our knowledge. All numbers and features proposed in this data sheet (e.g. lifetime) were determined under test conditions in the laboratory and therefore represent a nonbinding and purely scientific value. There are no guarantees associated with. Only the respectively agreed warranty period and warranty rights apply. To the extent permitted by law, all other warranties of any kind, whether express or implied, including, but not limited to the implied warranties of...