Pro 200 Series
1 / 4Páginas

The Next Generation of Porcelain Furnaces Ensuring Consistent Firing Quality ProCheck automatically verifies the accuracy of your furnace temperature calibration • In less than eight minutes. • Can be used to check all Whip Mix Pro Series furnaces. • Pre-set to the three standard Whip Mix furnace calibration points of 1150°C, 1000°C, and 850°C. • Simply place the firing tray, plug in ProCheck and dial the QC temperature. In just a few minutes, the ProCheck LED lights clearly indicate: - Way Underfire - Mild Underfire - On Temperature - Mild Overfire - Way Overfire • Includes adaptor. Specification Item # Absolute Accuracy Stability / Repeatability Accessories High Efficiency Pump ProCheck 200 Series Adaptor Rated at 29.5” HG Maximum Vacuum and 1.75 CFM open flow. This oil-free, rocking-piston, rugged construction pump comes complete with rubber feet and the muffler assembly in place. Use with all Pro Series furnaces and FireLite furnaces. ProCheck Adaptor for use with Pro 200 Series furnaces. Free Vacuum Pump with all Pro Series Furnaces Whip Mix Corporation • 361 Farmington Avenue • Louisville, KY 40209 800-626-5651 • Fax 502-634-4512 • www.whipmix.com

Advanced Technology 200 Program Memory ProPress 200 Pressing Porcelain Furnace Pro 200 Porcelain Furnace The Pro 200 and the Pro Press 200 Porcelain Furnaces are affordable yet intelligently designed with cutting edge technology. They have advanced cycles for e.max®, In-Ceram®, Wol-Ceram®, Captek™, sintered alloys and advanced porcelain products. The Pro 200 Series is completely lead free in compliance with the international RoHS directive. • 200 open programs for Pressing or Ceramics. • Expandability without replacement of the entire unit. • Open I/O (in/out) ports for additional devices....

Advanced Technology 200 Program Memory ProPress 200 Pressing Porcelain Furnace Pro 200 Porcelain Furnace The Pro 200 and the Pro Press 200 Porcelain Furnaces are affordable yet intelligently designed with cutting edge technology. They have advanced cycles for e.max®, In-Ceram®, Wol-Ceram®, Captek™, sintered alloys and advanced porcelain products. The Pro 200 Series is completely lead free in compliance with the international RoHS directive. • 200 open programs for Pressing or Ceramics. • Expandability without replacement of the entire unit. • Open I/O (in/out) ports for additional devices....

The Next Generation of Porcelain Furnaces Ensuring Consistent Firing Quality ProCheck automatically verifies the accuracy of your furnace temperature calibration • In less than eight minutes. • Can be used to check all Whip Mix Pro Series furnaces. • Pre-set to the three standard Whip Mix furnace calibration points of 1150°C, 1000°C, and 850°C. • Simply place the firing tray, plug in ProCheck and dial the QC temperature. In just a few minutes, the ProCheck LED lights clearly indicate: - Way Underfire - Mild Underfire - On Temperature - Mild Overfire - Way Overfire • Includes adaptor....